Best Nibbler Attachment For Cordless Drill
Best results for nibbler attachment for cordless drill
Lnchett Double Head Sheet Nibbler Metal Cutter, Quality Nibbler Drill Attachment for Straight Curve and Circle Cutting, Maximum 14 Gauge Steel
$39.99
$59.19
Amazon.com
Last update was on: April 25, 2024 2:31 pm
- ►Easy and fast to cut 14 gauge material and creates a precision, burr free edge
- ►360 degree double cutting head to cut straight line, curve line and circles
- ►HSS cutting blades to cut including but not limited to: Sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminium, formica, plastic, fibreglass
- ►Fits any drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips
Astro Pneumatic Tool 727 ONYX Heavy Duty Air Nibbler
Makita XNJ01Z 18V LXT Lithium-Ion Cordless 16 Gauge Nibbler, Tool Only
$307.59
$412.17
Amazon.com
Last update was on: April 25, 2024 2:31 pm
- Makita-built motor delivers 1,900 SPM for fast and smooth cutting
- Ideal for cutting roofing sheet metal at thicknesses up to 16 gauge
- Die holder rotates 360Degree to meet demands of cutting direction
- Convenient chip disposal is below cutting material to minimize damage to cutting surface
- Cutting radius: inner edge 1-3/4"
- outer edge 2"
Malco TSMD Double-Cut TurboShear Drill Attachment
$109.99
$139.69
Amazon.com
Last update was on: April 25, 2024 2:31 pm
- Remove a narrow spiral scrap from the tool path to produce a clean, straight edge on both sides of the cut
- These blades can approach a cut from either end to produce a quality work-piece edge
- Blades can also navigate up to 90Degree outside profiles of metal roofing panels, or metal ductwork, and are beefy enough to cut through seams
- The long lasting carbon steel blades are also easily replaced on the job
Genesis GES40 4.0 Amp Corded Swivel Head Variable Speed Electric Power Metal Shear
$43.90
$53.56
Amazon.com
Last update was on: April 25, 2024 2:31 pm
- Quickly cuts metal roofing, flashing, and other sheet metal up to 14 gauge | Compare the Genesis metal shear to other drill attachment Shears that can only cut 20 gauge Sheet metal!
- Powerful 4.0 amp motor
- 360° swiveling head for cutting control and convenience |cut circles and curves with the Genesis electric metal shear
- Variable speed (0-2500) SPM for versatility in cutting a variety of materials | cuts through sheet metal up to 14 gauge in thickness!
Malco TSHD Turboshear Heavy Duty Metal Cutting Attachment Shear
$94.49
$130.40
Amazon.com
Last update was on: April 25, 2024 2:31 pm
- Made in the USA
- Replaceable blades
- Turns your power drill into a heavy duty power shear
- Inserts into the chuck of a 14.4 volt or larger A/C or cordless drill
- Capacity to cut 18 gauge galvanized steel and 20-gauge spiral duct
- Navigates tight patterns and square cuts
DEWALT DCS491B 20V Max 18 Gauge Swivel Head Shear (Tool Only)
$195.00
$265.20
Amazon.com
Last update was on: April 25, 2024 2:31 pm
- 360 Degree tool free swivel head which allows user to access tight quarters
- Cuts 7/32" strips which continuously curls out of the cutting area providing consistent and accurate cuts
- Cordless shears allows user to take the tool to the work Place
- Backed by dewalt's 3 year limited Warranty
- Battery & Charger Sold Separately
Double Headed Sheet Metal Nibbler, REXBETI Drill Attachment Metal Cutter with Extra Punch and Die, 1 Cutting Hole Accessory and 1 Step Drill Bit, Perfect for Straight Curve and Circle Cutting (gold)
$35.99
$42.47
Amazon.com
Last update was on: April 25, 2024 2:31 pm
- Easy and fast to cut 14 gauge material and creates a precision, burr free edge
- 360 degree double cutting head to cut straight line, curve line and circles
- HSS cutting blades to cut including but not limited to: Sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminium, formica, plastic, fibreglass
- Fits any drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips
Malco TSCM Corrugated Metal Turbo Shear
$104.99
$137.54
Amazon.com
Last update was on: April 25, 2024 2:31 pm
- Attaches to a drill or impact driver you already own
- Make fast cross-cuts, lengthwise trim cuts in large or small metal corrugated patterns
- 360 degree rotating head for optimum tool clearance and material flow
- Able to cut curves and straight lines
- Made in the USA
Makita JN1601 5 Amp 16 Gauge Nibbler
$283.99
$377.71
Amazon.com
Last update was on: April 25, 2024 2:31 pm
- Clean and precise work in keystone plate, deck plate and other corrugated sheet materials
- Die rotates 360°
- Large 1/4"" stroke
- Ergonomic, slim body design for easy gripping
- Extremely light (weighs only 3.6 lbs.) for easy handling.Overall Length : 10.25 inches
- Lock-on sliding switch for continuous operation
Double Headed Sheet Metal Nibbler Cutter, Lichamp Drill Attachment Nibbler Metal Cutting Double Head 360 Degree, 5 Pcs Tool Set with Iron Tool Box, for Workshop, Home DIY and Car Repair
$27.99
$37.23
Amazon.com
Last update was on: April 25, 2024 2:31 pm
- 1 ) PERFECT TOOL FOR ANY CUTTING TASK: This multi-purpose nibbler cutter is suitable for cutting of various materials such as sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminum, formica, plastic, fiberglass etc. Suitable for car repairing and maintenance, metal sheet, gutters, roof sections, complex shapes or stencils.
- 2 ) EASY USE AND CONTROL: Easily fit into any standard drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips. Compact size, easy to operate and labor-saving. Easy and fast to cut 14 gauge material and creates a precision, burr free edge, 360 degree double cutting head to cut straight line, curve line, circles, or many other irregular lines and shapes.
DEWALT DWASHRIR Impact Ready Shears Attachment
$44.63
$66.05
Amazon.com
Last update was on: April 25, 2024 2:31 pm
- Able to cut up to 18GA material
- 360 degree swivel head for maneuverability
- Connects via standard 1/4-inch hex shank
- Compatible with most 18V-20V impact driver and drills
- Able to cut up to 18GA material
- Connects via standard 1/4-inch hex shank
Malco TS1 Turbo Shear 20 Gauge Capacity Sheet Metal Cutting Attachment
DEWALT DCS496B 20V Max 18 Gauge Offset Shear (Tool Only)
$238.90
$286.68
Amazon.com
Last update was on: April 25, 2024 2:31 pm
- 360 Degree tool free swivel head which allows user to access tight quarters
- Offset Shear design can easily turn and cut circles
- Offset Shear design can easily cut through 20ga spiral duct seams
- Backed by dewalt's 3 year limited Warranty
- Battery & Charger Sold Separately
DEWALT DCS355B 20V XR Oscillating Multi-Tool (Tool Only)
Malco TSHD1 Automotive Heavy Duty 18 Gauge Turbo Shear Drill Attachment
$96.76
$134.50
Amazon.com
Last update was on: April 25, 2024 2:31 pm
- Easily cuts auto body panels
- Wide opening jaws navigate thick plastic bumper profiles
- Perfect for cutting rocker panels and layered metal
- Cuts straight and to the left including round and square auto body patches
- Replacement blades available
DEWALT DCS494B 20V MAX 14ga Swivel Head Double Cut Shears (Tool Only)
$251.64
$332.16
Amazon.com
Last update was on: April 25, 2024 2:31 pm
- 360 degree tool with a free swivel head which allows user to access tight quarters
- Cuts 7/32" strip which continuously curls out of the cutting area providing accurate cuts
- LED work light illuminates surface
- Cordless shears allows user to take the tool to the workplace
- Battery sold separately
- Battery & Charger Sold Separately
Ingersoll Rand EC300 Air Nibbler
$98.99
$127.70
Amazon.com
Last update was on: April 25, 2024 2:31 pm
- Cuts up to 18 gauge steel, aluminum, plastic or other metals
- 6 ft. Per minute cutting rate
- At 4200 strokes per minute the EC300 holds a tight 1/4 in. Radius
- Angled head for easy cutting
- Features include an ergonomic grip, low profile throttle lever, and front exhaust
DEWALT DWA2FTS100 Screwdriving and Drilling Set, 100 Piece
$49.99
$71.49
Amazon.com
Last update was on: April 25, 2024 2:31 pm
- 30-piece IMPACT READY FlexTorq screwdriving set
- 37-piece screwdriving set with Tough Case
- 19-piece screwdriving set with Tough Case
- 14-piece gold ferrous Pilot Point drilling set
- Features some of DEWALT's most popular bits that cover an array of uses