Best Malco Ts1 Turbo Shear
Best results for malco ts1 turbo shear
Malco TS1 Turbo Shear 20 Gauge Capacity Sheet Metal Cutting Attachment
Malco TSCM Corrugated Metal Turbo Shear
$104.99
$151.19
Amazon.com
Last update was on: May 5, 2024 4:01 am
- Attaches to a drill or impact driver you already own
- Make fast cross-cuts, lengthwise trim cuts in large or small metal corrugated patterns
- 360 degree rotating head for optimum tool clearance and material flow
- Able to cut curves and straight lines
- Made in the USA
Malco TSHD1 Automotive Heavy Duty 18 Gauge Turbo Shear Drill Attachment
$93.86
$122.96
Amazon.com
Last update was on: May 5, 2024 4:01 am
- Easily cuts auto body panels
- Wide opening jaws navigate thick plastic bumper profiles
- Perfect for cutting rocker panels and layered metal
- Cuts straight and to the left including round and square auto body patches
- Replacement blades available
Malco TSHDRB Replacement Blade for Malco for TSHD Heavy Duty Sheet Metal Turbo Shear
Double Headed Sheet Metal Nibbler, REXBETI Drill Attachment Metal Cutter with Extra Punch and Die, 1 Cutting Hole Accessory and 1 Step Drill Bit, Perfect for Straight Curve and Circle Cutting (gold)
$37.99
$46.73
Amazon.com
Last update was on: May 5, 2024 4:01 am
- Easy and fast to cut 14 gauge material and creates a precision, burr free edge
- 360 degree double cutting head to cut straight line, curve line and circles
- HSS cutting blades to cut including but not limited to: Sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminium, formica, plastic, fibreglass
- Fits any drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips
Lnchett Double Head Sheet Nibbler Metal Cutter, Quality Nibbler Drill Attachment for Straight Curve and Circle Cutting, Maximum 14 Gauge Steel
$39.99
$58.79
Amazon.com
Last update was on: May 5, 2024 4:01 am
- ►Easy and fast to cut 14 gauge material and creates a precision, burr free edge
- ►360 degree double cutting head to cut straight line, curve line and circles
- ►HSS cutting blades to cut including but not limited to: Sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminium, formica, plastic, fibreglass
- ►Fits any drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips
Double Headed Sheet Metal Nibbler 360 Degree, Illuminate Ultimate Metal Cutter for Straight Circle and Round Cutting, Burr-free Edge, Extra Punch and Die, 1 Cutting Hole Accessory and 1 Step Drill Bit
$33.99
$47.25
Amazon.com
Last update was on: May 5, 2024 4:01 am
- Cutting jobs becomes easier, faster and safer with this double headed sheet metal nibbler, fitting effortlessly into any standard drill. it can glide through material up to 2mm thick or 14 gauge and creates a precision, burr free edge
- Sheet metal, corrugated material, pipes, Complex profiles, powder coated material, stainless steel, copper, aluminum, Formica, plastic, fiberglass. Even soft materials such as denim, leather, paper or card. It is so versatile and it can handle it all with ease
Malco TSF2 TurboShear Fiber Cement Backer Board Shear
$138.32
$171.52
Amazon.com
Last update was on: May 5, 2024 4:01 am
- Attaches to a drill or impact driver you already own
- Easily cuts 1/2-inch backer board and 5/16-inch Fiber Cement Siding Plank with minimal dust
- 360 degree rotating head for optimum tool clearance and material flow
- Able to cut precise arcs, straight lines and fine trimming
- Made in the USA
Malco TSHD Turboshear Heavy Duty Metal Cutting Attachment Shear
$94.49
$137.01
Amazon.com
Last update was on: May 5, 2024 4:01 am
- Made in the USA
- Replaceable blades
- Turns your power drill into a heavy duty power shear
- Inserts into the chuck of a 14.4 volt or larger A/C or cordless drill
- Capacity to cut 18 gauge galvanized steel and 20-gauge spiral duct
- Navigates tight patterns and square cuts
WEN 3650 4.0-Amp Corded Variable Speed Swivel Head Electric Metal Cutter Shear
$44.44
$57.33
Amazon.com
Last update was on: May 5, 2024 4:01 am
- Pressure sensitive trigger cuts anywhere from 0 to 2500 strokes per minute
- Attack up to 20 gauge stainless steel and 18 gauge sheet metal
- Lightweight design limits fatigue during operation
- Utilizes a powerful 4-amp motor, curling the metal as it cuts
- Swiveling head rotates a full 360 degrees to meet the needs of any project
MIDWEST Aviation Snip Set – Left and Right Cut Offset Tin Cutting Shears with Forged Blade & KUSH’N-POWER Comfort Grips – MWT-6510C
$32.99
$38.60
Amazon.com
Last update was on: May 5, 2024 4:01 am
- 2 PIECE OFFSET SET - Includes both left and right cut offset models. A favorite of professional sheet metal tradesman and contractors
- LONGEST LASTING CUTTING EDGE - Blades are hot drop-forged of molybdenum alloy steel and austemper heat-treated for maximum strength and durability
- STRONGEST HANDLES - High Tensile strength steel will not bend from hand pressure and provides efficient conversion of hand force to cutting power
Genesis GES40 4.0 Amp Corded Swivel Head Variable Speed Electric Power Metal Shear
$43.90
$63.22
Amazon.com
Last update was on: May 5, 2024 4:01 am
- Quickly cuts metal roofing, flashing, and other sheet metal up to 14 gauge | Compare the Genesis metal shear to other drill attachment Shears that can only cut 20 gauge Sheet metal!
- Powerful 4.0 amp motor
- 360° swiveling head for cutting control and convenience |cut circles and curves with the Genesis electric metal shear
- Variable speed (0-2500) SPM for versatility in cutting a variety of materials | cuts through sheet metal up to 14 gauge in thickness!
Double Head Sheet Metal Cutter, Versatile Nibbler Drill Attachment for Straight Curve and Circle Cutting, Maximum 14 Gauge Steel, Perfect for Home DIY and Car Repair
$37.99
$45.97
Amazon.com
Last update was on: May 5, 2024 4:01 am
- ►Easy and fast to cut 14 gauge material and creates a precision, burr free edge
- ►360 degree double cutting head to cut straight line, curve line and circles
- ►HSS cutting blades to cut including but not limited to: Sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminium, formica, plastic, fibreglass
- ►Fits any drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips