Best Haas Cnc Milling Machine
Best results for haas cnc milling machine
OrangeA 8Pcs CAT40 Tool Holder ER16 Collet Chuck Set length 2.76"/70mm Chuck Tool Holder Set Mill Holder for CNC Engraving Machine Milling Lathe(CAT40-ER16-70)
$153.94
$201.66
Amazon.com
Last update was on: May 18, 2024 11:20 am
- ➤ Set of 8 high precision ER16 collet chuck.
- ➤ Gage or projection length of ER16 is 2.76"(70mm).
- ➤ Accuracy in 0.0001-0.0002" max.
- ➤ Fully ground flange and V-groove-easy on tool changers for less spindle.
- ➤ Fit for Drilling Machine ,Milling Machine CNC Chuck or Holder.
Norton Combination Grit Abrasive Benchstone, Aluminum Oxide, 6" Length x 2" Width x 1" Height
TRIM Cutting & Grinding FLUIDS SC520/54 SC520, General-Purpose Semisynthetic, 54 gal Drum, Blue
$1,322.00
$1,480.64
Amazon.com
Last update was on: May 18, 2024 11:20 am
- Good sump life in 'stand-alone' machines
- Low odor and mist
- Effective in most grinding, sawing, drilling, and CNC Turning and milling operations by varying concentrations
- Provides sufficient lubricity to do d-the-hole operations in aluminum, cast iron, and most steels, including many stainless steels
- Compatible with a very wide range of materials including cast iron, steels, copper, and aluminum alloys as well as most plastics and composites
TRIM Cutting & Grinding FLUIDS C115/54 C115, Synthetic, 54 gal Drum
$947.70
$1,402.60
Amazon.com
Last update was on: May 18, 2024 11:20 am
- Compatible with a very wide range of materials including cast iron, steels, plastics, and composites
- Does an excellent job in most glass, ceramic, and composite grinding applications
- Excellent corrosion inhibition on most common ferrous and nonferrous alloys
- Extremely low carry off keeps operating costs D
- Low Foam and mist
TRIM Cutting & Grinding FLUIDS MS690XT/54 Micro Sol 690XT, High-Lubricity, Low-Foam Premium Semisynthetic, 54 gal Drum
$2,235.31
$2,615.31
Amazon.com
Last update was on: May 18, 2024 11:20 am
- Dramatically extends useful life without the need for tank-side biocides or fungicides
- Boron and halogen free
- Low foaming for todays demanding high-pressure, high-volume applications
- Compatible with a very wide range of materials including titanium, high Nickel alloys, steels, copper, and aluminum alloys
- Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
Shars Tool 0-6" Solid Metal Frame Micrometer Set
OrangeA 5 PCS Collet Set CAT40 ER32 Collet Chuck with Pull Stud Spanner Wrench Collet Chuck for CNC Engraving Machine & Milling Lathe Tool (CAT40 ER32 with Pull Stud Spanner Wrench)
$115.99
$141.51
Amazon.com
Last update was on: May 18, 2024 11:20 am
- 5 Pcs CAT40 ER32 collet chuck, Pull Stud and Spanner Wrench included
- Collet chuck with projection length is 2.75"
- Collet set which is hardened and ground to ensure maximum accuracy
- Fully ground flange and V-groove-easy on tool changers for less spindle
- Holder Spring Collet Set fit for Drilling Machine ,Milling Machine CNC Chuck or Holder
Accusize Industrial Tools Style C, Cat40 Pull Stud Retention Knob, Solid, Fits Haas, Mitsubishi, Toshiba, Daewoo, Okk, Kitamura, Etc, 6780-1025
$9.90
$11.09
Amazon.com
Last update was on: May 18, 2024 11:20 am
- CAT40 Pull Stud Retention Knob with Coolant Hole,
- Fully ground on all critical surface including a pilot under the flange of retention knob for full contact between tool holder's taper end and retention knob
- Style C
- Taper: CAT 40
- Angle: 45 Degree, thread: 5/8''-11
TRIM Cutting & Grinding FLUIDS E206N/54 E206, Long-Life Emulsion, 54 gal Drum, Dark Blue
$2,096.00
$2,829.60
Amazon.com
Last update was on: May 18, 2024 11:20 am
- Very versatile product for a wide range of operations like heavy-duty broaching, gear hobbling, production, surface and centerless grinding, and replacing straight oil on some types of screw machines
- Contains highly effective, extreme-pressure additives to control built-up edge
- Compatible with all ferrous and nonferrous materials
- Extremely Stable and fine emulsion to reduce carry off and to facilitate getting the fluid to the point of cut
Master STAGES TASK2APC/54 Task2 All Purpose Cleaner 54 gal Drum, Blue
$486.54
$686.02
Amazon.com
Last update was on: May 18, 2024 11:20 am
- Versatile all-around shop cleaner
- Pratt Whitney aerospace Approval PMC 1247-1
- Contains No butyl, caustic, silicate, phosphate, nitrite, phenol, or borate
- Very low V.O.C. Content, conductivity, and pH
- Environmentally friendly, Certified 'readily biodegradable' by OECD method 301D (EPA guideline OPPTS 835.3110)
TRIM Cutting & Grinding FLUIDS MS585XT/54 Micro Sol 585XT, Extended-Life, Non chlorinated Semisynthetic, 54 gal Drum
$1,970.51
$2,798.12
Amazon.com
Last update was on: May 18, 2024 11:20 am
- Dramatically extends useful life without the need for tank-side biocides or fungicides
- Low foaming for todays demanding high-pressure, high-volume applications
- Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
- Optimized combination of cooling and lubricity for titanium machining applications
- Provides superior corrosion inhibition on cast iron and eliminates 'hot chip' and clinkering problems
TRIM Cutting & Grinding FLUIDS C270/54 C270, High-Performance Synthetic, 54 gal Drum
$1,120.50
$1,423.04
Amazon.com
Last update was on: May 18, 2024 11:20 am
- C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
- Provides excellent corrosion inhibition on all common ferrous alloys
- Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based Ep additives
- Extremely low carry off for very low total operation costs
- Very low Foam and mist
