Best Dremel Carbide Cutter Bit
Best results for dremel carbide cutter bit
Carbide Burr Set JESTUOUS 1/8 Shank Diameter Double Cut Tungsten Carbide Burs Rotary File Carving Grinding Bit for Die Grinder Rotary Drill Tool 20pcs
$17.99
$19.97
Last update was on: May 18, 2024 11:10 am
- Used with handheld electric or pneumatic tool drive,for Die Grinder, Dremmel Tool or Rotary Drill which can go along with 1/8" shank carbide burs.
- With tungsten carbide material ,sharp and sturdy,processing all kinds of metal and non-metal.
- For cast iron, cast steel, carbon steel, alloy steel, stainless steel,plastics,metal and other materials.
- Assorted shapes include: ball, cone, rounded cylinder, flat top cylinder.
Dremel 9904 Tungsten Carbide Cutter
$4.11
$5.26
Last update was on: May 18, 2024 11:10 am
- Use on Hardened steel, fired ceramics and other hard materials
- 1/8" Maximum cutting head
- 1/8" Shank
- Do not use for drilling or enlarging holes less than twice the diameter of the cutter to avoid carbide surface catching side of hole and breaking
- For best results insert bit in tool and back out slightly before tightening down to provide plenty of shank for the collect or chuck to hold the bit
- Secure objects to a stable surface while working
Dremel 9933 Structured Tooth Tungsten Carbide Cutter
$8.79
$11.95
Last update was on: May 18, 2024 11:10 am
- The product is 5/16" Tung Carb Cutter
- Teeth made of tungsten carbide, the hardest material next to diamonds
- For fast material removal on fiberglass, wood, plastic, epoxy
- Also great on rubber, laminates, particleboard, soft metals, and ceramic wall tile
10pcs 1/8" Double Cut Tungsten Carbide Rotary Files Diamond Burrs Set Fits Dremel Rotary Tool for Grinder Drill, DIY Wood-working Carving, Metal Polishing, Engraving, Drilling
$11.56
$15.26
Last update was on: May 18, 2024 11:10 am
- LONG WORKING LIFE: Lasts long working life, packed with nice plastic case for safety storage and protection. High efficiency, high-quality finish, long service life, good economic returns.
- CARBIDE DIE GRINDER BITS Material: Tungsten Carbide Use: Rotary Burr. Total length 45-50mm, cutting diameter 1/4 Inch(6mm), shank length 35mm, shank diameter 1/8 inch(3mm).
- HIGH PRODUCTIVITY: Processing efficiency than the manual file to improve of times, than with a small handle wheel to improve nearly ten times.
Dremel 114 High Speed Cutter
$4.79
$6.18
Last update was on: May 18, 2024 11:10 am
- The product is 5/16" Engraving Cutter
- Compatible with all Dremel rotary tools.
- A versatile, high-quality cutter made of high-grade steel for use on wood, plastic and soft metals.
- Ideal for shaping, hollowing, grooving, slotting, inlaying and making tapered holes in soft metals, plastics and woods especially on curved surfaces.
Dremel 9906 Tungsten Carbide Cutter
Dremel MM501 1/16-Inch Multi-Max Carbide Grout Blade
$15.99
$22.39
Last update was on: May 18, 2024 11:10 am
- Lightweight and compact, easy to use for long periods of time in tight spaces
- Operates at very high speeds for quick results and smooth finishes
- Perfect for work demanding precision and control
- Dremel has the tools, attachments and accessories that help you make your detailed project a success
- Measures 1/16-inch
- Lightweight and compact, easy to use for long periods of time in tight spaces
Dremel 9901 Tungsten Carbide Cutter
WayinTop 50pcs PCB Drill Bits Set Spiral Flute Carbide 0.3mm-1.2mm for Print Circuit Board Stone Dremel Jewelry CNC Engraving (5pcs each)
$17.99
$19.97
Last update was on: May 18, 2024 11:10 am
- 【High Quality】The PCB Drill Bits are made of high quality tungsten steel, highly wear resistance, high hardness, bending strength, anti-impairment, highly working efficiency.
- 【Multi Size】This Set contains 10 different size drill bits diameter: 0.3mm, 0.4mm, 0.5mm, 0.6 mm, 0.7 mm, 0.8 mm, 0.9 mm, 1 mm, 1.1mm, 1.2mm, each size have 5 pcs.
- 【High Precision】 With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left.
Dremel 9911 Tungsten Carbide Cutter
$8.48
$10.35
Last update was on: May 18, 2024 11:10 am
- Do not use for drilling or enlarging holes less than twice the diameter of the cutter to avoid carbide surface catching side of hole and breaking
- For best results insert bit in tool and back out slightly before tightening down to provide plenty of shank for the collect or chuck to hold the bit
- Secure objects to a stable surface while working
- Use the sides of the cutter (rather than the tip) for effective cutting the tip cuts poorly and can break under pressure
Dremel 9903 Tungsten Carbide Cutter
Dremel 9910 Tungsten Carbide Cutter
$8.99
$11.42
Last update was on: May 18, 2024 11:10 am
- The product is 1/8 Inch Diameter, Tungsten Carbide Cutter
- Do not use for drilling or enlarging holes less than twice the diameter of the cutter to avoid carbide surface catching side of hole and breaking
- Secure objects to a stable surface while working
- Use the sides of the cutter (rather than the tip) for effective cutting the tip cuts poorly and can break under pressure
- Use higher speeds for hard woods slower speeds for metals and very slow speeds for plastics
eBoTrade 10 Pieces Tungsten Carbide Rotary Burr SET 1/8" Shank/double Cut Carbide Rotary Burr Set with 3mm Shank/tungsten Carbide Single Cut Rotary Burr SET 1/8" Shank Fit Dremel
$14.99
$17.69
Last update was on: May 18, 2024 11:10 am
- ✔ Tungsten Carbide Double Cut Rotary Burr SET 1/8" shank Fit Dremel
- ✔ Shank diameter: 3mm, Shank Length: 35mm, Cutting edge diameter: 6 mm
- ✔ Material: Tungsten | Carbide Use: Rotary Burr, High micro hardness,high abrasion resistance,good toughness
- ✔ High performance on processing Copper, Aluminum, Alloy, Iron, Marble, Jade, Steel, Glass, Wood and Plaster etc.
- ✔ Highly recommended for polishing metals and plastics, jewelers, lapidary use, hobbies, crafts, craft modeling, home repair and so much more.
Dremel 561 Multipurpose Cutting Bit
Dremel 6541/4" Straight Routing Bit
Dremel 689-01 11-Piece Rotary Tool Carving and Engraving Kit
$10.58
$14.49
Last update was on: May 18, 2024 11:10 am
- Comes with 11 assorted carving and engraving accessories
- Features 4 engraving cutters and 4 grinding stones
- Includes a diamond wheel point and diamond carving bit
- Packaged in a convenient mini accessory case
- A great addition to your Dremel accessory line-up
Dremel EZ544 EZ Lock Wood Cutting Wheel
$13.99
$20.85
Last update was on: May 18, 2024 11:10 am
- The Dremel EZ Lock makes accessory changes easy as pull - twist - release
- The one-piece mandrel design simplifies makes it easy to cut through wood and laminates
- Cuts 1/2-Inch wood and laminate fast with little effort
- Easy to assemble
- Cuts peg-board for tool storage