Best Countersink Drill Bit For Steel
Best results for countersink drill bit for steel
IRWIN Metal Countersink Drill Bit Set, 5 Piece, 1877793
$36.41
$53.52
Amazon.com
Last update was on: April 28, 2024 1:12 pm
- Precision ground 82° tip for countersinking most machinable metals, wood, and plastic
- Made from industrial grade high speed steel for increased durability
- Includes a black oxide finish for added corrosion resistance
- Five-flute design reduces vibration for smoother drilling and extended life
- 1/4" round shank fits all handheld and stationary drills
3 Flute 90 Degree HSS Chamfering End Mill Cutter Bit Countersink Drill Bit Pack of 6pcs
KEO 53512 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 82 Degree Point Angle, Round Shank, 5/16" Shank Diameter, 1/2" Body Diameter
$16.00
$22.72
Amazon.com
Last update was on: April 28, 2024 1:12 pm
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
ABN Screw Countersink Kit 5-Piece SAE Drill Bit Set, 82-Degree, 1/4in Shank, 5 Flute – Metal, Wood, Rubber, Plastic
$17.69
$25.65
Amazon.com
Last update was on: April 28, 2024 1:12 pm
- CUT DIFFERENT MATERIALS: Use the ABN Screw Countersink Kit 5-Piece SAE Drill Bit Set, 82-Degree, 1/4” Inch Shank, 5 Flute to quickly and easily cut soft metal, wood, rubber, plastic, and other machinable materials
- Drill a hole and then use one of the included bits to countersink a spot of the screw head
- SIZES: The 5 bits come in SAE standard sizes 1/4-inch, 3/8-inch, 1/2-inch, 5/8-inch, 3/4-inch
MOHOO Countersink Drill Bits, 7pcs Woodworking Countersink Drill Bits Set, Woodworking Chamfer High-Speed Steel Countersink Drill Bits for Woodworking 3 4 5 6 7 8 10mm With Hex Key
$9.99
$11.59
Amazon.com
Last update was on: April 28, 2024 1:12 pm
- ①TRI-POINTED DESIGN: The countersink drill bits set with tri-cuspid centering that make sure drills will not produce offset, not easy to slip, no bias, good for accurate and fast drilling. The five-edged chamfer design of the countersink drill helps to remove chips from the holes on both sides automatically and quickly.
- ②HIGH CARBON STEEL MATERIAL: Countersink drill bits are made of high carbon steel which offer high hardness, superior cutting power, good abrasion resistance.
IVY Classic 09050 1/2-Inch M2 High Speed Steel Countersink, 5 Flute, 82-Degree Point, 1/Card
$9.52
$12.19
Amazon.com
Last update was on: April 28, 2024 1:12 pm
- Precision-ground 82-degree point for countersinking into most Machin able metals, wood and plastic
- Hardened and tempered M2 High-Speed Steel, Premium Swift Bore (Registered Trademark)
- Designed with five flutes for chatter free smooth drilling, chamfering and deburring
- Creates a conical shaped recess to seat flat and oval-head screws
- Diameter: 1/2-inch, Overall Length: 2-1/4-inch, Shank: 1/4-inch round shank
Countersink Drill Bit (7 PCS), Three Pointed High Speed Steel Drill with One Hex Key, Countersink Drill Bit for Wood Drilling or Woodworking Chamfer, Wood DIY (3-10mm)
$8.49
$11.46
Amazon.com
Last update was on: April 28, 2024 1:12 pm
- 【HIGH QUALITY 】The countersink drill bit is made of high speed steel material with titanium nitrate coating. Black chamfer drilling body is used to make the product have better stability, hardness and wear resistance
- 【THREE-POINTED DESIGN】Three-point design can drill smooth holes quickly and accurately, so that the drill bit is not easy to slip. Five - edge chamfer Angle design, automatic detritus in the holes on both sides of the rapid discharge
Rannb High Speed Steel Straight Shank 32mm Cutting Dia 60° Chamfer Mill Cutter Countersink Drill Bit -Pack of 1
$19.99
$26.39
Amazon.com
Last update was on: April 28, 2024 1:12 pm
- ????【Material】Countersink drill bit is made of High-speed steel, offering a combination of hardness and toughness for wear resistance.
- ???? 【Round Shank】Countersink drill bit is with round shanks which are available for a wide variety of toolholding systems.
- ????【60 Degree Holes】Used for drilling holes with chamfered edges 60 degree holes, 32mm/1.26" drill diameter.
- ????【Mutiple Application】Ideal for wooden planks,fiberboard,particle board,plywood,plastic,alumiumn board ,pcb board and more.
CO-Z HSS 5PCS Titanium Spiral Grooved Step Drill Bit Set with Automatic Center Punch, Unibit Drill Bits Set for Sheet Metal with Aluminum Case, Multiple Hole Stepped up Bits for DIY Lovers
$28.99
$35.95
Amazon.com
Last update was on: April 28, 2024 1:12 pm
- DURABLE TITANIUM COATED BITS W/SPIRAL GROOVES, the spiral grooved drill cut more smoothly than straight grooved ones, the drill bit is sharp and can easily drill perfect holes in the metal sheet while the Titanium coating improves durability hence lengthening the service life.
- 50 SIZES IN 5, our bits set includes five standard step drill bits that are capable to drill 50 holes with different diameters, saving you time and efforts
IRWIN Tools Black Oxide Countersink Drill Bit, 5-Piece Set (1877791)
$19.98
$26.97
Amazon.com
Last update was on: April 28, 2024 1:12 pm
- Made from industrial grade High-Speed Steel for increased durability. Black oxide finish adds corrosion resistance.
- Five-flute design reduces vibration for smoother drilling and extended bit life.
- Precision-ground 82-degree tip drills countersink holes into most machinable metals, as well as wood and plastic.
- 1/4-inch round shank fits all handheld and stationary drills.
Neiko 10218A Countersink Drill Bit Set, M2 High Speed Steel, 1/4” Tri-Flat Shank | 1/4”-3/4”, 5 Piece Set with Carrying Case
$21.49
$28.80
Amazon.com
Last update was on: April 28, 2024 1:12 pm
- Set of five 1/4" countersink drill bits with precision-ground 82-degree tips for drilling into wood, soft metals, rubber, plastic, and more
- Made of high quality M2 material construction for extended bit life and 1/4" shank fits common handheld power drill
- Five-flute design reduces vibration for smoother drilling and tri-flat shank allows easy gripping
- Set contains 1/4", 3/8", 1/2", 5/8", and 3/4" countersink drill bits that are very commonly used
ORXPLUS TOOLS 5 Flute Countersink Drill Bit, 90 degree for 1/4” Hex Shank Fit 1/8"-3/4"(3mm-19mm)
$17.60
$21.12
Amazon.com
Last update was on: April 28, 2024 1:12 pm
- Designed to clean internal pipe ends quickly and safely. Made of alloy steel, cutter to remove damaged metal and burrs.
- Applicable for use on hole from 3mm to 19mm in diameter
- Features a 1/4" quick change Hex shank fits all handheld and stationary drills
- Multiple Application - Suitable for use including stainless steel, hardened steel, mild steel, copper, brass, plastic and many more
TACKLIFE 9 Pcs Countersink Drill Bit Set with 1 Hex Key Wrench& 1 Storage Bag, High-Speed Steel Adjustable Carpentry Reamer Plated for Wood DIY-CDB01
$13.99
$16.23
Amazon.com
Last update was on: April 28, 2024 1:12 pm
- 24-month warranty, don't hesitate to contact us if you have any problem!
- ▲【Superior Drill Bit Set】The material of the drill bit is made of high-quality high-speed steel, which has high toughness and good wear resistance. The five-edge chamfer design automatically and quickly removes chips from the holes on both sides.
- ▲【Unique Design】The five-edge chamfer design automatically and quickly removes chips from the holes on both sides.
Vermont American 16638 High Speed Steel Countersink, 3/4-Inch
Countersink Drill Bit (7 PCS), Drill Bit Set with One Hex Key, High-Speed Steel Drill Adjustable Carpentry Reamer Plated for Wood DIY (3-10mm)
$13.99
$15.53
Amazon.com
Last update was on: April 28, 2024 1:12 pm
- 【Werkzeug Direct Only】Please purchase products from store Werkzeug ONLY, other sellers are all without authorization. Werkzeug would not responsible for any other counterfeit sources.The countersink drill bit is made of high carbon steel material with titanium nitrate coating. High hardness, durable and offer superior cutting power.
- 【Unique Design】Three-Pointed design can quickly and accurately drill a smooth hole. Five-edged chamfer design will fast discharge chips from the hole on both sides automatically.
Countersink Drill Bit Set 7 Pack 1/4” Hex Shank and 90 Degree HSS 5 Flute Drill for Woodworking Drilling
$9.99
$11.39
Amazon.com
Last update was on: April 28, 2024 1:12 pm
- SIZE: 6mm (1/4 inch), 8mm (5/16 inch), 9mm (3/8 inch), 10mm (2/5 inch), 12mm (1/2 inch), 16mm (5/8 inch), 19mm (3/4 inch).
- HIGH QUALITY: The flute countersink drill bit set is made from standard high speed steel and super hard titanium coated bits.
- GOOD WORKING: Great for sinking 90 degree countersink bit holes into wood and soft metals countersunk screws and fixings.
- GREAT DESIGN: 1/4 inch hex shank drill are fine for a quick change. They don’t slip in drill chucks. Delivers an automatic spring driven strike when pressed against surface.
Irwin Tools 1877720Countersink Drill Bit,Black Oxide, 3-Piece
$30.57
$39.13
Amazon.com
Last update was on: April 28, 2024 1:12 pm
- Precision-ground 82 tip for countersinking into most machinable metals, wood or plastic
- Made from industrial grade high speed steel for increased durability
- Includes a black oxide finish for added corrosion resistance
- Five flute design reduces vibration for smoother drilling and extended life
- 1/4" round shank fits all handheld and stationary drills
