Best Core Drill Bit Adapters
Best results for core drill bit adapters
Concord Blades CBW03000SP 3 Inch Wet Concrete Diamond Core Drill Bit
$70.03
$86.84
Amazon.com
Last update was on: April 24, 2024 4:34 pm
- 10 mm segment height, 3.5mm Segment Width, 1-1/4" -7mm Arbor
- Use Wet Only
- This core bit is used for wet drilling on cured concrete with hard aggregate and medium to heavy steel reinforcement, and asphalt overlay on concrete
- Does not come with a pilot bit
- 14" tube length
Bosch 4-Inch x 17-Inch x 22-Inch SDS Max Rotary Hammer Core Bit HC8555
$161.63
$234.36
Amazon.com
Last update was on: April 24, 2024 4:34 pm
- EFFICIENT: The Bosch SDS-max carbide-tipped rotary hammer core bit features an effective wave design to transfer energy for up to 40 percent speedier drilling versus other bit designs.
- POWER: With an integral shank, the HC8555 offers better power transmission and is designed to allow smaller hammers to drill larger holes.
- VERSATILE: This core bit is versatile in application with materials including concrete, brick, and block.
Concord Blades CBD02500HP 2-1/2 Inch Laser Welded Dry/Wet Diamond Core Drill Bit
$49.72
$59.66
Amazon.com
Last update was on: April 24, 2024 4:34 pm
- 10 mm segment height, 3.8mm Segment Width, 5/8"-11mm Arbor
- Use Dry/Wet
- This core bit is used for general purpose dry drilling on a variety of soft brick and concrete block using either a Handheld Core Drill or a Core Drill Rig
- Does not come with a pilot bit
- Item is a pearlescent color. It changes between white and silver depending on the lighting
Bosch T3926SC 13-Inch Extension Sds-Plus for Speedcore Thin-Wall Core Bits
2-1/2 in. CARBIDE TIPPED BIT, Breakthrough Drill Bit, SDS Max (2.5" X 20" X 24")
Bosch HC5099 Wild Bore Head SDS-max Shank Bit 2 x 18 x 23-Inch
$94.15
$123.34
Amazon.com
Last update was on: April 24, 2024 4:34 pm
- Patented extra strength tip for longer life
- Large flute volume for fast drilling dust transport and less clogging
- Narrow flute back for reduced friction between bit and material
- Creates true round holes for anchors
- Diameter is 2 inches with 16 inches usable length. Total length is 21 inches.
DPT Shaft Adapter for Core Drill, 1 1/4"-7 Female to 5/8"-11 Male, for Use with Diamond Core Bits
Drilax Diamond Core Drill Bit Adapter 5/8 Inch – 11 Female Arbor To 3/8 Inch Triangle Male Shank Female Thread Back Holders To Regular Drill
$11.19
$12.76
Amazon.com
Last update was on: April 24, 2024 4:34 pm
- SAVE MONEY - USE YOUR REGULAR DRILL - This adapter will help you use the special female threaded core bits with your regular drill.
- CONVERTS and TRANSFORMS 5/8 inch - 11 Female Thread to 3/8 inch Triangle Shank for Common Drill Use
- Most Diamond Core Masonary Bits and Back Holders are 5/8 inch - 11 - NOW you can use them with our adapter
- Our adapter has the male thread on one side, that screws into the female thread of the tool you want to use. The other side is regular 3/8 inch Triangle Shank that goes into the Drill Chuck
DT-DIATOOL Diamond Drill Bit Adapter DD-BL to DD-BS for HILTI
$66.80
$78.16
Amazon.com
Last update was on: April 24, 2024 4:34 pm
- DT-DIATOOL Diamond core drill adapter (DD-BL to DD-BS) for HILTI DD160E DD200 DD250E DD350
- Hilti DD-BL Chuck to 1-1/4"-7 (BS) Threaded Bit Connection, total length 115MM
- Fit the 1 1/4UNC or 1/2 BSP thread diamond core bits on Hilti Machine DD 160E/250E/200/350 Through this adapter
- Good strength adapter is made from a solid piece of steel
