Best Byrd Shelix Head For Dewalt Dw735 Planer New
Best results for byrd shelix head for dewalt dw735 planer new
Byrd Tool Shelix cutterhead for Dewalt planer DW735
$379.00
$485.12
Amazon.com
Last update was on: July 27, 2024 12:08 am
- Cutterhead diameter is 0.088" (roughly 1/16 in) smaller than the original OEM head to allow for installation without removing the carbide inserts.
- C3 carbide cutters lasts an average of 10 times longer per side (4 sides = 40x) than traditional steel knives.
- Spiraled to break up chips for dust collection, shear to give clean cutting action
- True helical cut (slices the wood) which greatly reduces noise and tearout
DEWALT DW735X Two-Speed Thickness Planer Package, 13-Inch
Amazon.com
Last update was on: July 27, 2024 12:08 am
- Powerful 15 AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) handles larger cuts in wider materials with ease
- Three knife cutter-head delivers 30% longer knife life, fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine
- Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI
- Maximum depth of cut 1/8 inch, depth capacity 6 inches, width capacity 13 inches
Wixey WR510 Digital Planer Readout with Fractions
PORTER-CABLE PC160JT Variable Speed 6" Jointer
$339.00
$461.04
Amazon.com
Last update was on: July 27, 2024 12:08 am
- Variable 6, 000 to 11, 000 RPM speed range allows the user to select the right speed for the size and hardness of material being cut
- Two knife cutter head with jack screw knife leveling arrangement for easy replacement and adjustment of knives
- Built-in cutter head lock facilitates knife replacement and adjustment
- Extra large table provides ample work support and Surfacing stock up to a full 6" wide
Byrd Tool woodworking Shelix OEM Size cutterhead for Dewalt planer DW735
$432.43
$518.92
Amazon.com
Last update was on: July 27, 2024 12:08 am
- This DW735 OEM cutterhead is machined slightly larger to give you a cutterhead that is the same size as the one you are removing. You will need to remove the inserts from the cutterhead prior to install, and then replace them after the cutterhead is in place.
- Staggered, spiral carbide insert configuration provides a shear, rather than straight cut for a smoother finish and quieter operation.
- Helical insert knife configuration breaks up chips, making dust collection easier.