Best Extended Length Drill Bit
Best results for extended length drill bit
Neiko 10047A 12” Extra Long Drill Bit Set, 5 Piece | 1/8", 3/16", 1/4", 5/16", 3/8"
$15.95
$19.46
Last update was on: May 6, 2024 2:31 am
- High speed steel construction is designed for durability and extended tool life
- Extra long 12 inch body provides better stability and balance during quick operation to ensure position is intact
- Great for general purpose use on hand drills and allows you to access hard to reach areas where jobber length drills can not go
- Versatile tool is ideal for drilling in metal, wood, plastic, PVC and other different materials
12" Long Brad Point Bit Set (7 Drill Bit Set). Perfect For Drilling Wood, Plastic, Drywall and Composite Materials
$21.99
$25.29
Last update was on: May 6, 2024 2:31 am
- If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
Bosch BL2739 3/16 In. x 12 In. Extra Length Aircraft Black Oxide Drill Bit
$4.99
$5.99
Last update was on: May 6, 2024 2:31 am
- Speed helix design for three times faster drilling than standard bits
- Last 50 percent longer than high-speed steel
- Easier drilling, reduced heat and extended drill bit life
- Available in jobber length, stubby length, extended length (aircraft), 1/2 In. reduced shank (Silver and Deming)
- For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
Bosch BL2735 1/8 In. x 12 In. Extra Length Aircraft Black Oxide Drill Bit
$4.91
$6.87
Last update was on: May 6, 2024 2:31 am
- Speed helix design for three times faster drilling than standard bits
- Last 50 percent longer than high-speed steel
- Easier drilling, reduced heat and extended drill bit life
- Available in jobber length, stubby length, extended length (aircraft), 1/2 In. reduced shank (Silver and Deming)
- For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
Drill America 1/8" x 6" High Speed Steel Aircraft Extension Drill Bit (Pack of 12), DWDA/C Series
$20.64
$26.01
Last update was on: May 6, 2024 2:31 am
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
DEWALT DW1606 1/4-Inch by 12-Inch Extra Long Black Oxide Drill Bit
$12.20
$13.42
Last update was on: May 6, 2024 2:31 am
- The product is 1/4x12 has STL drill bit
- Easy to use
- The product is manufactured in China
- 135 degree split point drills on contact and prevents walking
- Parabolic flute design improves chip ejection in metal and wood drilling applications
- Black oxide coated for greater wear resistance
Hymnorq 3/8 Inch Fractional Size M35 Cobalt Steel Twist Drill Bit Set of 5pcs, Jobber Length and Straight Shank, Extremely Heat Resistant, Perfect Drilling in Stainless Steel and Cast Iron
$21.99
$25.51
Last update was on: May 6, 2024 2:31 am
- COBALT STEEL - Manufactured from M35 grade cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.
- FOR METALWORKING - Particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate.
Bosch CO2135 1/8 In. x 2-3/4 In. Cobalt Drill Bit
$1.65
$2.11
Last update was on: May 6, 2024 2:31 am
- Withstands high-temperature applications for extended periods of time (up to 1,100 degreeF)
- Rigid, thick web design adds stability to bit in tough applications
- Surface hardened to penetrate tough abrasive materials
- Available in jobber length, full shank
- Best used for drilling into light-gauge metal, high-carbon steel, aluminum and ally steel, cast iron, stainless steel and titanium
Vermont American 13158 Black Oxide Fractional Extended Length Aircraft Drill Bit, 1/8-Inch by 6-Inch
$2.59
$3.39
Last update was on: May 6, 2024 2:31 am
- This item is Vermont American 13158 Black Oxide Fractional Extended Length Aircraft Drill Bit, 1/8-Inch by 6-Inch
- Used for Power Tool Accessories, Drill Bits & Accessories
- The produt is manufactured in China
- Superior durability and speed for most general purpose drilling applications in wood, metal and plastic
- Triple tempered black oxide coating provides very high lubricity to reduce heat buildup and prolong the life of the bit
Bosch BL2747 5/16 In. x 12 In. Extra Length Aircraft Black Oxide Drill Bit
$9.98
$11.68
Last update was on: May 6, 2024 2:31 am
- Speed helix design for three times faster drilling than standard bits
- Last 50 percent longer than high-speed steel
- Easier drilling, reduced heat and extended drill bit life
- Available in jobber length, stubby length, extended length (aircraft), 1/2 In. reduced shank (Silver and Deming)
- For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
Irwin Tools 62120 Single Black and Gold High-Speed Steel Drill Bit, 5/16"
$8.13
$12.03
Last update was on: May 6, 2024 2:31 am
- This is a replacement cabinet that will hold all of the bits in the IRWIN 3019000 252-piece Black and Gold drill bit set
- 3 rows of labeled slots keep all of your bits organized and accessible
- Size labels identify bits clearly
- Exclusive TURBOMAX tips on Black and Gold bits eliminate "walking", deliver faster starts, and stays shar longer
Drill America 1/4" x 6" Cobalt Aircraft Extension Drill Bit, GLBCO Series
$7.29
$8.24
Last update was on: May 6, 2024 2:31 am
- Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
- 135° split point tip prevents drill from walking
- Round shanks allow use with a wide variety of tool holding systems
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools
- performance is similar to uncoated tools
- 6" overall length for drilling where extra length for reach is required
8 Pcs 200mm Extra Long Twist Drill Bits for Steel Straight Shank Tool Sets Wood Plastic and Aluminum, Plastic, Jewelry 2mm – 7mm
$10.99
$15.72
Last update was on: May 6, 2024 2:31 am
- Diameter: 2mm 2.5mm 3mm 4mm 4.5mm 5mm 6mm 7mm.Length:about 200mm(about 7.8 inch)
- Application:drill bits kit are great for most drilling jobs and materials such as aluminum, wood, plastics PVC and other different materials or your daily drill use.
- Quantity:This set includes 8 pieces drill bit in different sizes of the most popular drill bits.1 pc/per size.
- provides better stability and balance during quick operation to ensure position is intact
QLOUNI 8Pcs 200mm/8” Extra Long Drill Bits Set HSS Twist Bits 4/4.2/4.5/5/5.2/6/8/10mm Round Shank Wood Working Tool
$14.99
$18.29
Last update was on: May 6, 2024 2:31 am
- [200mm/8'' Long Drill Bit] the right length body provides better stability and balance during quick operation to ensure position is intact, and allows you to access hard to reach areas
- [Titanium Coated HSS] Classic HSS construction with heat treatment, sharp twisted drill bits will make the drilling easier and more effortless, durable and not easy to bend
- [Shank Type] 4/4.2/4.5/5/5.2/6/8/10mm standard round shank twist bit, fits into all power tools more easily and securely
Bosch BL2635 1/8 In. x 6 In. Extra Length Aircraft Black Oxide Drill Bit
$5.19
$7.37
Last update was on: May 6, 2024 2:31 am
- Speed helix design for three times faster drilling than standard bits
- Last 50 percent longer than high-speed steel
- Easier drilling, reduced heat and extended drill bit life
- Available in jobber length, stubby length, extended length (aircraft), 1/2 In. reduced shank (Silver and Deming)
- For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials