Best 5/8 Metal Drill Bit
Best results for 5/8 metal drill bit
Best Choice 8-Piece 1/2” Shank Silver and Deming Drill Bit Set in Aluminum Carry Case, High Speed Steel (HSS) | SAE Size 9/16” – 1” by 1/16th Increment
$26.99
$30.50
Last update was on: May 18, 2024 11:12 pm
- Premium cobalt high speed steel construction for proven capability and durability to drill holes in wood, plastic, aluminum, copper, stainless, sheet metals and many other types of materials
- Superior gold titanium and black nitride dual coating finish holds up lubricant better for smoother drilling, and is 80% more durable and corrosion resistant than regular black enamel finish
- 135° Split point design at tip increases cutting speed with self-centering feature and prevents drill walking or wobbling
Neiko 10193A Titanium Step Drill Bit Set, High Speed Steel | 3-Piece Set | Total 28 Sizes
$12.90
$14.96
Last update was on: May 18, 2024 11:12 pm
- TITANIUM | HIGH SPEED STEEL: classic high speed steel with titanium coating for proven capability and durability in drilling holes in plastic, aluminum, copper, stainless steel and many other types of sheet metal
- 135° SPLIT POINT TIP: increases cutting speed with self-centering and prevents walking
- TWO-FLUTE DESIGN: clears chips faster and allows particles to escape easily
- TRI-FLATTED SHANK: fits into power tools chuck securely and eliminates slip
Togu DB-02 5/8" (16mm) High Speed Steel Drill Bit
$6.49
$7.46
Last update was on: May 18, 2024 11:12 pm
- 1.Cutting edge is made of Top-class HSS (High Speed Steel).
- 2.Through special heat treatment, the cutting edge is sharp with high intensity.
- 3.Good cutting effect of ferrous and non-ferrous metals, be able to process stainless steel plates below 3mm
- 4.Applicable to Togu Door Viewers whose brass pipe diameters are 9/16"(14mm) and 5/8"(16mm) such as TG-2614 NG/YG series, TG-2814 NG/YG series, TG-3016 NG/YG and TG 1612-3016 series.
COMOWARE Step Drill Bit – Titanium Coated, Double Cutting Blades, High Speed Steel, Short Length Drill Bit, Total 10 Sizes
$9.99
$13.19
Last update was on: May 18, 2024 11:12 pm
- HSS Titanium Coating - High speed steel along with titanium coating ensures outstanding durability and sharpness, can reduces the friction, runs cooler.
- Meet Your Demands - With the step drill bits we offered, you can process different kinds of diameter holes, which greatly saves you a lot of trouble.Great for steel sheets/ aluminum sheets/ copper/ plastic/ wood board and many other types of sheet metal with ease countersunk. Suitable for Home DIY, and General Building/ Engineering Use.
Neiko 10181A Quick Change HSS Titanium Coated Spiral Grooved Step Drill Bit 3-Piece Set | 31 Step Sizes in One Kit
$15.99
$21.59
Last update was on: May 18, 2024 11:12 pm
- Constructed of industrial high speed steel with titanium nitride coating for durability and strength to punch and drill clean holes in materials like plastic, aluminum, wood, copper, stainless steel and other types of sheet metal
- Unibit split point tip accelerates cutting speed while preventing angled walking away from center line of bore
- Two-flute spiral grooved design deburrs chip, dust and debris for clearance and smooth cutting
CO-Z Step Drill Bits, HSS 5PCS Titanium Step Drill Bit Set, 50 Sizes in 5 High Speed Steel Unibit Drill Bits Set for Sheet Metal with Aluminum Case, Multiple Hole Stepped Up Bits for DIY Lovers
$22.89
$32.05
Last update was on: May 18, 2024 11:12 pm
- Extreme Durabikity: Cobalt high speed steel drill bits along with the titanium coating ensures extreme durability, will stay new and shiny for years to come.
- Different Sizes of Holes Can Be Drilled: Different sized shanks ensure compatibility with 1/4, 3/8 and 1/2 in. chuck sizes. You are capable to drill holes in different sizes which can meet your normal needs.
- Smooth Drilling: Non-walking drill tip provides fast and smooth drills on steel sheets, aluminum sheets, wood board, plastic board etc. (the board must be smaller in thickness than the height of step drill bits).
Irwin Tools 91156 IRWIN Silver & Deming Drill Bit, 7/8" Diameter
Innetoc 3/8" Shank Titanium Step Drill Bit, 1/4′ to 1-3/8′ in 1/8′ Increments with SafePlastic Case|10 Steps
$9.79
$14.20
Last update was on: May 18, 2024 11:12 pm
- SUPER STRONG: Made of high speed steel and titanium coated for added durability and bit life
- MULTIPLE DRILL SIZES WITH ONE BIT: 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1-1/8, 1-1/4, 1-3/8-inch
- VERSATILE AND FAST: 3/8" 3-flat shank prevents slippage when drilling new holes or enlarging existin
- Saves time without changing drill bits
- Works on plastic, wood and most metals, including steel, brass, aluminum and copper
IRWIN Tools SPEEDBOR Max Speed Wood Drill Bit Set, 3-Piece (3041003)
$11.40
$13.79
Last update was on: May 18, 2024 11:12 pm
- Fits all standard 1/4-Inch quick change chucks
- Wood drill bit set features bits with a tri-flute design for faster chip ejection
- Cutting spurs have 3 cutting edges for added durability
- Full screw tip allows bit to self feed
- Grooved hex shank prevents slipping in drill chuck or bit extension
Irwin 3041002 Speedbor Max 5/8-Inch by 6-Inch Self Feeding Spade Bit
IRWIN 91140 5/8-Inch Silver and Deming Drill Bit, Pack of 1
Champion Cutting Tool BlackGold XG12-5/8 Silver & Deming1/2" Shank Drill: MADE IN USA
$22.28
$30.08
Last update was on: May 18, 2024 11:12 pm
- Heavy Duty BlackGold Silver & Deming drills have superior strength and durability than standard S&D Drills
- BlackGold surface treatment holds lubricant for smoother, longer drilling. Drill faster and penetrate more accurately due to 118* split point.
- 1/2" Flatted Reduced Shank for use in portable drills or drill presses where max chuck capacity is 1/2"
- Ideal for drilling steel, steel plate, stainless steel, cast iron, titanium, nimonic alloys, manganese, and other tough materials
Triumph Twist Drill Co. 072283 5/8 Diameter TCR High Speed Steel Drill, Black and Bronze Oxide Coated, 1-Pack
$56.09
$79.65
Last update was on: May 18, 2024 11:12 pm
- High Speed Steel for general purpose drilling in a variety of materials
- Tapered Construction or alignment reamer with 1/2 inch 3-flatted shank with 4-1/2 inches of flute length
- 1/2-Inch diameter shank
- Made in the U.S.A.
- Alignment reamer for enlarging a hole
Drill America 5/8" Reduced Shank High Speed Steel Black & Gold KFD Drill Bit with 3/8" Shank, KFD Series
$16.95
$19.15
Last update was on: May 18, 2024 11:12 pm
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Gold and black surface treated for use in stainless steel and other hard metal drilling
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
IRWIN Metal Countersink Drill Bit Set, 5 Piece, 1877793
$36.41
$41.87
Last update was on: May 18, 2024 11:12 pm
- Precision ground 82° tip for countersinking most machinable metals, wood, and plastic
- Made from industrial grade high speed steel for increased durability
- Includes a black oxide finish for added corrosion resistance
- Five-flute design reduces vibration for smoother drilling and extended life
- 1/4" round shank fits all handheld and stationary drills
QWORK 3 Pcs Titanium Step Drill Bit Set, High Speed Steel, 1/8" – 3/4" Total 28 Sizes, HSS Multiple Hole Drilling Cutting with Storage Bag
$10.99
$13.19
Last update was on: May 18, 2024 11:12 pm
- 1) 3 standard SAE step drill bits can drill 28 different size of holes on different thickness of materials. One 3/16-inch to 1/2-inch six-step bit, 1/4-inch to 3/4-inch nine-step bit, and 1/8-inch to 1/2-inch 13-step bit(detailed hole size and drill depth of each drill bit please check in Product description below)
- 2) Made of high quality high speed steel that is hard and sharp enough to drill through wood, plastic, steel and sheet metal
TEMO M35 Cobalt Spiral Flute Step Drill, 12 size from 3/16 inch (4.8mm) to 7/8 inch (22.2mm), 1/4 inch (6.4mm) Hex Shank
Last update was on: May 18, 2024 11:12 pm
- M35 cobalt step drill 1/4" (6.35mm) hex shank 12 hole 3/16" (4.76mm) to 7/8" (22.22mm)
- 12 hole sizes: 3/16" (4.76mm), 1/4" (6.35mm), 5/16" (7.94mm), 3/8" (9.52mm), 7/16" (11.11mm), 1/2" (12.7mm), 9/16" (14.29mm), 5/8" (15.88mm), 11/16" (17.46mm) , 3/4" (19.05mm), 13/16" (4.76mm), 7/8" (22.22mm) with 1/16" (1.59mm) increments. The size marks are stamped next to each step to ease the use.
- double spiral flutes for more efficient swarf clearance; 1/4 Inch hex Shank with quick release slot to eliminate slipping; Self-starting for clean holes in thin materials;
DEWALT DWA1790IR 3-Piece IMPACT READY Step Drill Bit Set
COMOWARE Reduced-Shank Drill Bit- HSS M2 5/8” Silver and Deming Industrial Drill Bit, Black and Gold Oxide Finish, 135 degree split point, ideal for the most handle, with storage case
Last update was on: May 18, 2024 11:12 pm
- High Quality Material - High Speed Steel M2 Black and Gold, resists corrosion, ensures outstanding durability, sharpness and capability, reduces the friction and runs cooler.
- Black and Gold Oxide Finish - Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant than the regular black surface.
- 135-degree & Split Point - Increases cutting speed with self-centering and prevents walking, clears chips and particles faster. The split point tip can increase the wear resistance. 135-degree penetrates hard material without a pilot hole and produces small chips to reduce clogging.