Best 14.5 Mm Drill Bit
Best results for 14.5 mm drill bit
Drill America 14.50mm High Speed Steel 2MT Metric Taper Shank Drill Bit, DWDTS Series
$9.92
$13.79
Amazon.com
Last update was on: April 16, 2024 10:18 pm
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Morse taper shank allows the tool to be inserted directly into the machine's spindle to facilitate high-torque applications such as large cut diameters
MZCMSL Fine Ceramic Cone Nail Bit, Portable Electric Manicure Drill for Acrylic or Gel Polish Removing,White Head, 6 x 14.5 mm
SpeTool Ceramic Nail Drills Bit For Cuticle Clean Gel Remove Nail Salon Use Medium Grit
$7.99
$11.59
Amazon.com
Last update was on: April 16, 2024 10:18 pm
- Ceramic bit could be used in nail art, manicure and so on, suitable for professional, salon, or home use
- 2.35mm (3/32 inch) stainless steel shank diameter fits for most electric manicure machine on the market
- Head diameter: 6MM, dead length: 14.5MM, style: flame, grit: medium, : pink
- Treatment of very think gel nails and hyper-keratosis, it leaves an optional working base after grinding for the further nail modeling
Precision Twist 2A High Speed Steel Jobber Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degree Point Angle, 14.50mm
Amazon.com
Last update was on: April 16, 2024 10:18 pm
- Jobber-length, for a wide range of applications
- 118-degree conventional point angles, for general drilling applications
- Round shanks, for use on a variety of tool-holding systems
- Uncoated (bright), for use with a wide range of drilling materials
- High-speed steel (HSS), for use on a wide variety of materials
uxcell 14.5mm Hinge Boring Forstner Drill Bit, 8mm x 30mm Shank
$8.29
$10.28
Amazon.com
Last update was on: April 16, 2024 10:18 pm
- 14.5mm Professional Quality Forstner Drill Bit
- Drill precise flat bottom holes with no chipping in any thickness of soft wood
- Drill straight, angled and overlapping holes
- Two spurs and center spur to give repeated, clean and accurate hole cutting
- 85mm length Carbide Forstner Bit is easy to use
COMOK 14.5mm Tip Diameter HSS High Speed Steel Twist Drill Bit 1/2 Straight Shank Drilling Hole Tool
Blacksmiths Drill Bit MASO 14.5 mm Blacksmith Reduced Shank HSS Drill Bit for Aluminium, Steel, Wood, Plastic, Non-ferrous ect
HUHAO Forstner tips Woodworking tools Hole Saw Cutter Hinge Boring drill bits 8mm Shank Carbide Cutter 14.5mm Cut Dia
Amazon.com
Last update was on: April 16, 2024 10:18 pm
- Buy 2 free shipping, Material: Hard carbide
- Accurate positioning, high hardness, impact resistance, high precision, smooth cutting, high toughness. Drilling clean flat bottom holes with no chipping.
- Perfect for drawer, mounting spherical door shoot tip. Perforation on wood products, plastic products, hinges etc.
- Each drill bit is packaged in a separate plastic box, anti-corrosion, anti-oxidation, easy to use and carry.
MZCMSL Needle/Ball Cuticle Clean Drill Bit, White Ceramic Cone Nail Bit and Brush Bit,3/32 Shank Manicure Drill Kit, 4pcs
$9.98
$13.97
Amazon.com
Last update was on: April 16, 2024 10:18 pm
- 3/32 shank ,4 pcs, Head Dimension:Φ6*14.5mm
- Φ1.6*10mm
- Φ2.34mm
- The Needle bit can be used to clean the cuticle area, side walls and use it for under the nail edge.
- The Ceramic cone bit (medium grit),it is great for removing the gel or acrylic,
- The Ball bit can also be used for the cuticle area, and side walls.
ZXHAO 1/2 Straight Shank Hardened High Speed Steel 14.5mm(37/64") Metric Jobber Drill with Plastic Case
$9.89
$14.54
Amazon.com
Last update was on: April 16, 2024 10:18 pm
- Twist Drill Bit Total Size: 155 x 14.5mm/6.1 x 0.57 inch (L*Max.D)
- Metric Jobber Drill Shank Diameter: 1/2 inch
- Material: High Speed Steel
- Black Oxide Surface Treatment holds up lubricant better for smoother drilling.
- Sharp and twisted flute will make the drilling be more easy and effortless.
- Excellent for drilling on both flat and curved surfaces such as stainless steel and cast Iron.
uxcell 1/2 inches Straight Shank 14.5mm Drill Bit HSS 9341 1pcs
uxcell 1/2 inches Straight Shank 14.5mm Drill Bit HSS 6542
uxcell 1/2 inches Straight Shank 14.5mm Split Point Tip HSS High Speed Steel Twist Drill Bit
SpeTool Ceramic Nail Drill Bits Flame 3/32" Shank For Manicure Electric Dill File, Fine Grit
$7.99
$9.43
Amazon.com
Last update was on: April 16, 2024 10:18 pm
- Ceramic bit could be used in nail art, manicure and so on, suitable for professional, salon, or home use
- 2.35mm (3/32 inch) stainless steel shank diameter fits for most electric manicure machine on the market
- Head diameter: 6MM, dead length: 14.5MM, style: flame, grit: fine, color: pink
- Treatment of very think gel nails and hyper-keratosis, it leaves an optional working base after grinding for the further nail modeling
Cleveland 2001G Style High Speed Steel Jobbers’ Drill Bit, Black Oxide, Round Shank, 118 Degree Point, 14.5mm Size
Amazon.com
Last update was on: April 16, 2024 10:18 pm
- Vanadium steel for greater heat resistance than high-speed steel (HSS)
- Black oxide improves lubricity, resists corrosion, and resists flaking, and also helps prevent buildup of material on the tool’s cutting edge
- Jobber-length, for a wide range of applications
- 118-degree conventional point angles, for general drilling applications
- Round shanks, for use with a variety of tool holders
- Made in the USA
uxcell 14.5mm Hinge Boring Forstner Drill Bit with 8mm Round Shank
$8.79
$12.66
Amazon.com
Last update was on: April 16, 2024 10:18 pm
- 14.5mm Industrial Quality Forstner Drill Bit
- Drill precise flat bottom holes with no chipping in any thickness of soft wood
- Drill straight, angled and overlapping holes
- Two spurs and center spur to give repeated, clean and accurate hole cutting
- 85mm length Carbide Forstner Bit is easy to use
SpeTool Carbide Black Titanium Coated Nail Drill Bit Flame Shape Extra Coarse For Nail Polishing Gel Remove, 6×14.5mm
$11.59
$17.15
Amazon.com
Last update was on: April 16, 2024 10:18 pm
- 100% Brand New in retail package, made of tungsten carbide
- This carbide bits use a cutting action to remove product with smooth top
- creating less dust with little friction and heat
- Suitable for professional or home use nail machine, Surface Work, Shortening and Backfill Cutting 3/32 inch shank diameter
- Diameter of the bit head: 6mm
- Length of bit head: 14.5mm
HUHAO Forstner Bits Wood Drill Bits For Holes 14.5mm Cut Dia Coated Carbide Hole Opener
Amazon.com
Last update was on: April 16, 2024 10:18 pm
- Buy 2 free shipping, Material: Carbide
- Industrial grade
- Forstner bit, Carbide, Industrial grade, Long shank, Woodworking tool, Hole opener, Wood drill bits for holes, Cutter
- Suitable materials: sharp edge, particle board, MDF, solid wood drilling preferred.
- Advantages: The cutting edge and the blade are made of special high-quality carbide alloy material, which has the advantages of high hardness, good sharpness, impact resistance and wear resistance.
Cobra Carbide 31059 Micro Grain Solid Carbide Jobber Regular Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Four-Facet Point, 14.50mm Size, 150mm Length (Pack of 1)
$117.06
$139.30
Amazon.com
Last update was on: April 16, 2024 10:18 pm
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
